BWYSY - SPILFYTER FOR HYDROCARBONS GAP SEAL, 7800 SERIES
- MSDS: BWYSY
- Manufacturer: JV MANUFACTURING CO INC
- Product Name: SPILFYTER FOR HYDROCARBONS GAP SEAL, 7800 SERIES
- National Stock Number: 7930-00N057696
Product Identification
Product ID:SPILFYTER FOR HYDROCARBONS GAP SEAL, 7800 SERIES
MSDS Date:07/01/1993
FSC:7930
NIIN:00N057696
MSDS Number: BWYSY
Responsible Party
GREENBAY, WI 54304
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 202-483-7616;800-334-9092
Cage: IO899
Contractor
Telephone: 800-334-9092
Cage: IO899
Ingredients
ACTIVATED MONTMORILLONITE CLAY; (MONTMORILLONITE)
CAS: 1318-93-0
Fraction By Weight: <90%
OSHA PEL N/K
ACGIH TLV: N/K
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: >10%
OSHA PEL N/K
ACGIH TLV: N/K
APPLICS. ANY RESP WORN IN CONJUNCTION WITH
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: MAY CAUSE IRRIT.
EXPERIENCED AS MILD DISCOMFORT & SEEN AS SLIGHT REDNESS OF EYE.
SKIN: MAY CAUSE IRRIT. INHAL: EXPOS TO DUST LEVS EXCEEDING PEL MAY
CAUSE IRRIT OF UPPER RESP SYS. CHRONIC: INHAL: EXPOS TO FREE
SILICA CONTAININGAIRBORNE MONTMORILLONITE DUST WHERE LEVS ARE
HIGHER THAN TLV'S MAY LEAD (SUPDAT)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:EYES: REDNESS, TEARING. SKIN: REDNESS.
INHALATION: DRY COUGH.
Medical Cond Aggravated by Exposure:REPEATED SKIN CONTACT MAY AGGRAVATE
AN EXISTING DERMATITIS (SKIN CONDITION) AND/OR SENSITIVITY OF SKIN.
BREATHING OF DUST MAY AGGRAVATE ACUTE OR CHRONIC ASTHMA AND OTHER
CHRONIC PULMONARY DISEASES.
First Aid
First Aid:EYES: IMMED FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES.
HOLD EYELIDS APART WHILE FLUSHING TO RINSE ENTIRE SURF OF EYE &
LIDS W/WATER. SEEK MED ATTN. SKIN: REMOVE CONTAMD CLTHG. BRUSH OFF
EXCESS P OWDER W/DRY TOWEL. WASH AFFECTED AREA W/PLENTY OF SOAP AND
WATER FOR SEVERAL MINS. SEEK MED ATTN IF SKIN IRRIT
DEVELOPS/PERSISTS. INHAL: REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE
ARTF RESP. IF (SUPDAT)
Fire Fighting
Extinguishing Media:NON-FLAMMABLE AS SUPPLIED. ANY MEDIA CAN BE USED
FOR PACKAGING.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE. PRODUCT WILL NOT SUPPORT
COMBUSTION.
Accidental Release
Spill Release Procedures:AVOID BRTHG DUST. CONTAIN LEAKING/SPILLED
MATL. CLEAN-UP USING SHOVELS, SWEEPING/VACUUM SPILLED MATL TO AVOID
GEN AIRBORNE DUST. AVOID USING WATER. PROD SLIPPERY WHEN WETTED.
ALL SPILLS SHOULD BE HNDL D ACCORD TO PREDETERMINED PLAN I/A/W
29(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:CLEAN-UP SPILLS PROMPTLY TO AVOID
MAKING DUST. STORAGE AREA FLOORS MAY BECOME SLIPPERY IF WETTED.
Other Precautions:DO NOT BREATHE DUST. DO NOT GET PRODUCT INTO EYES.
Exposure Controls
Respiratory Protection:IF DUST IS GEN USE NIOSH/MSHA APPRVD AIR
PURIFYING RESP W/APPROP FILTER FOR SILICA BEARING DUST WHEN FREE
SILICA CONTAINING AIRBORNE MONTMORILLONITE DUST LEVS EXCEED PEL'S &
TLV'S.NIOSH/MSHA APPRVD SC BA SHOULD BE USED FOR LRG SCALE (SUPDAT)
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) AS APPROPRIATE, TO
MAINTAIN PEL'S AND TLV'S.
Protective Gloves:SUITABLE CHEMICALLY RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGG .
Other Protective Equipment:MAINTAIN, SAFETY EYE AND FACE FOUNTAIN IN
WORK AREA. HAVE OXYGEN READILY AVAILABLE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:8-10 (5% AQUEOUS SOLN). APPEAR/ODOR: POWDER, ODORLESS.HLTH HAZ: TO
DEVELOPMENT OF SILICOSIS/OTHER RESP PROBLEMS. PERSISTENT DRY COUGH
& LABORED BRTHG EXERTION ARE SYMP. FIRST AID PROC: BRTHG IS DFC LT,
GIVE OXYG. SEEK MED ATTN. INGESTION:CALL MD IMMED . SPILL PROC:
CFR 1910.120-HAZ WASTE OPERS & EMER RESPONSE.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:7282F,4028C
Spec Gravity:2.50000(H*2O=1)
pH:SUPDAT
Solubility in Water:INSOLUBLE
Appearance and Odor:BLUE TO GREEN AS MOIST SOLID, LIGHT TAN TO GRAY AS
DRY CRYSTALLINE (SUPDAT)
Stability
Stability Indicator/Materials to Avoid:YES
HYDROFLUORIC ACID AND STRONG OXIDIZERS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:DISP OF ORIGINAL (VIRGIN) MATERIAL I/A/W FED,
ST, & LOC REGULATIONS. ONCE PRODUCT SORBS CHEM THIS PROD TAKE ON
CHARACT OF CHEM SORBED & SHOULD BE DISP OF I/A/W ALL FEDERAL,
STATE, AND LOCAL REGULATION S FOR CHEMICAL SORBED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.